數字存儲示波器 LeCroy 9354AL/9354TM
廠家:美國力科 ( 21x37x41cm,13kg)
- 500M帶寬,4通道
- 采樣率最高可達2 GS/s
- 9354AL可達8M存儲深度,9354TM可達2M存儲深度
- Innovative Peak Detect Mode
- Fully programmable via GPIB and RS-232-C
- Automatic PASS/FAIL testing
- Advanced Signal Processing
- Internal High Resolution Graphics
- Glitch, Pattern, Qualified, Interval, Dropout and Video Triggers
- 8-bit vertical resolution, 11 with ERES option
- DOS Compatible Floppy Disk, PCMCIA potable hard drive and Memory Card options
采集系統
- 帶寬(-3 dB):DC to 500 MHz
- No. of Channels:4 CH
- No. of Digitizers:4 CH
- 最大采樣率:2 GS/s
- 采集存儲器:9354AL可達8 M,9354TM可達2M.
- 靈敏度:2 mV/div to 5 V/div, fully variable.
- Scale factors:A wide choice of over 12 probe attenuation factors are selectable.
- Offset Range:2.0 - 9.9 mV/div:± 120 mV
10.0 - 199 mV/div:± 1.2 V
0.2 - 5.0 V/div:± 24 V
±20 V across the whole sensitivity range when using the AP 020 FET probe. - DC Accuracy:< or equal to±2% full scale.
- 垂直分解度:8 bits.
- 帶寬限幅器:30 MHz
- 輸入耦合:AC, DC, GND.
- 輸入阻抗:1 M Ohm//14 pF or 50 Ohms ± 1%.
- 最大輸入:
1 M Ohm:250 V (DC+peak AC < or equal to 10 kHz)
50 Ohms:± 5 V DC (500 mW) or 5 V RMS
時基系統
- Timebases:Main and up to 4 Zoom Traces.
- Time/Div Range:1 ns/div to 1000 s/div.
- Clock Accuracy:< or equal to 10 ppm
- Interpolator resolution:10 ps
- Roll Mode:Ranges 500 ms to 1,000 s/div.
- For > 50k points:10 s to 1,000 s/div.
- External Clock:< or equal to 100 MHz on EXT input with ECL, TTL or zero crossing levels up to 500 MHz with option 935XA-CKTRIG.
觸發系統
- Trigger Modes:Normal, Auto, Single.
- Trigger Sources:CH1, CH2, Line, Ext, Ext/10 (9354:CH3, CH4), Slope, Level and Coupling for each can be set independently.
- Slope:Positive, Negative.
- Coupling:AC, DC, HF, LFREJ, HFREJ.
- Pre-trigger recording:0 to 100% of full scale (adjustable in 0.1 div increments).
- Post-trigger delay:0 to 10,000 divisions (adjustable in 0.01% increments).
- Holdoff by time:10 ns to 20 s.
- Holdoff by events:0 to 99,999,999 events.
- Trigger Bandwidth:Up to 500 MHz using HF coupling.
- Internal Trigger Sensitivity Range:± 5 div.
- EXT Trigger Max Input:
1 M Ohm//15 pF:250 V (DC+peak AC < or equal to 10 kHz)
50 Ohms ± 1%:± 5 V DC (500 mW) or 5 V RMS - EXT Trigger Range:±0.5 V (±5 V with Ext/10)
- Trigger Timing:Trigger Date and Time are listed in the Memory Status Menu.
-