檢測認證人脈交流通訊錄
雷擊耦合/去耦網絡SGN-5010A SGN-5010B SGN-20
- 主要規格:
- 執行標準:GB/T17626.5和IEC61000-4-5
- 產品介紹:
雷擊耦合/去耦網絡 Coupling / decoupling network for SG
SGN-5010A SGN-5010B SGN-20
雷擊浪涌耦合/去耦網絡是針對綜合波在電源線上做抗擾度試驗的特點和要求而設計的配套設備。SGN-5010A/SGN-5010B是單相網絡,SGN-20是三相網絡。這三個網絡都可以用來與SG-5006組合。網絡的性能符合IEC61000-4-5和GB/T17626.5標準的要求.
耦合方式:電容耦合 Coupling method: capacitor coupling
耦合電容:9μF(共模試驗)
18μF(差模試驗) Coupling capacitor: 9μF(common mode test)
18μF(normal mode test)
去耦電感:1.5mH Decoupling inductor: 1.5mH
主要技術參數 Specifications
項 目 Item SGN-5010A SGN-5010B SGN-20
耦合的浪涌波形
Surge waveform coupled 綜合波(1.2/50μs電壓波,8/20μs電流波)
Combination waveform(1.2/50μs voltage waveform, 8/20μs current waveform)
最大輸入浪涌電壓
Max. input voltage waveform 6.6kV
最大輸入浪涌電流
Max. input current waveform 3.3kA
耦合方式選擇
Coupling mode choice 手動操作 Manual operation
被試設備容量
Power capacity of EUT 單相,3線,220V,10A
Single phase, 3 wire, 220V, 10A 單相,3線,220V,20A
Single phase, 3 wire, 220V, 20A 三相,5線,380V,20A
Three phase, 5 wire, 380V, 20A
未加浪涌線上的殘余電壓
The residual surge voltage on unsurged line 試品不接時,殘余電壓不超過所施最大試驗電壓的15%
Not exceed 15% of the max. applicable test voltage when EUT is disconnected
電源線入口接的殘余電壓
The residual surge voltage on the power supply input of the decoupling network 試品不接時,殘余電壓不超過所施最大試驗電壓的15%或電源線峰值電壓兩倍
Not exceed 15% of the max. applicable test voltage when EUT is disconnected or twice for peak &#118alue of the power line voltage whichever is higher
工作電源 Power in AC 220V 50/60Hz
環境溫度 Operating temp. 15℃-35℃
重量 Weight 25kg 35kg
外形尺寸 Dimensions
(D×W×H)mm 460*520*240 460*520*310
蘇州泰思特電子科技有限公司
孫進
- [聯系時請說明來自檢測通]
- 聯系方式:
-
請點擊查看電話