廈門SGS提供緊固件測試

SGS -XM Provide fastener testing

緊固件機械性能

緊固件是作緊固連接用且應用極為廣泛的一類機械零件。在各種機械、設備、車輛、船舶、鐵路、橋梁、建筑、結構、工具、儀器、儀表和用品等上面都可以看到各式各樣的緊固件。它的特點是品種規格繁多性能用途各異而且標準化、系列化、通用化的種度也極高。

緊固件是應用最廣泛的機械基礎件。隨著我國2001年加入WTO并步入國際貿易大國的行列。我國緊固件產品大量出口到世界各國、世界各國的緊固件產品也不斷涌入中國市場。緊固件作為我國進出口量較大的產品之一實現與國際接軌對推動中國緊固件企業走向世界促進緊固件企業全面參與國際合作與競爭都具用重要的現實意義和戰略意義?！∮捎诿總€(gè)具體緊固件產品的規格、尺寸、公差、重量、性能、表面情況、標記方法以及驗收檢查、標志和包裝等項目的具體要求是分別規定在幾個國家行業標準中例如有英標、德標和美標。

為了保持緊固件行業持續穩定地發展我國提出了“在發展中調整在調整中提升”的新思路堅持以市場結構、產品結構調整為抓手推進企業重組和產業集聚促進全行業經濟增長方式的轉變。

測試標準：

GB/T 3098.1:緊固件機械性能 螺栓、螺釘、和螺柱

GB/T 3098.2:緊固件機械性能 螺母、粗牙螺紋

GB/T 3098.3:緊固件機械性能 緊定螺釘

GB/T 3098.4:緊固件機械性能 螺母、細牙螺紋

GB/T 3098.5:緊固件機械性能 自攻螺釘

GB/T 3098.6:緊固件機械性能 不銹鋼螺栓、螺釘和螺柱

GB/T 3098.7:緊固件機械性能 自擠螺釘

GB/T 3098.8:緊固件機械性能 -200℃~+700℃使用的螺栓連零件

GB/T 3098.9:緊固件機械性能 有效力矩型鋼鎖緊螺母

GB/T 3098.10:緊固件機械性能有色金屬制造的螺栓、螺釘、螺柱和螺母

GB/T 3098.11:自鉆自攻螺釘

GB/T 3098.12:緊固件機械性能 螺母錐形保證載荷試驗

GB/T 3098.13:緊固件機械性能 螺栓與螺釘?shù)呐ぞ卦囼?yàn)和破壞扭矩 公稱直徑1~10mm

GB/T 3098.14:緊固件機械性能 螺母擴孔試驗

GB/T 3098.15:緊固件機械性能 不銹鋼螺母

GB/T 3098.16:緊固件機械性能 不銹鋼緊定螺釘

GB/T 3098.17:緊固件機械性能 檢查氫脆用預載荷試驗 平面支撐面法

GB/T 3098.18:緊固件機械性能 盲柳釘試驗方法

GB/T 3098.19:緊固件機械性能 抽芯鉚釘

GB/T 3098.20:緊固件機械性能 蝶形螺母 保證扭矩

GB/T 3098.21:緊固件機械性能 不銹鋼自攻螺釘

Test Standard

Test standard:

GB/T 3098.1: Mechanical properties of fasteners ---Bolts ,screws and studs

GB/T 3098.2: Mechanical properties of fasteners ---Nuts---Coarse thread

GB/T 3098.3: Mechanical properties of fasteners ---Set screws

GB/T 3098.4: Mechanical properties of fasteners --- Nuts---Fine pitch thread

GB/T 3098.5: Mechanical properties of fasteners ---Tapping screws

GB/T 3098.6: Mechanical properties of fasteners ---Stainless steel Bolts ,screws and studs

GB/T 3098.7: Mechanical properties of fasteners ---Thread rolling screws

GB/T 3098.8: Mechanical properties of fasteners ---Parts for bolted connections for use at temperature from -200℃~+700℃

GB/T 3098.9: Mechanical properties of fasteners ---Prevailing torque steel nuts

GB/T 3098.10: Mechanical properties of fasteners --- Bolts ,screws ，studs and nuts made of non-ferrous metals

GB/T 3098.11: Drilling screws with tapping screw thread

GB/T 3098.12: Mechanical properties of fasteners --- Cone proof load on nuts

GB/T 3098.13: Mechanical properties of fasteners ---Torque test and minimum torques for bolts and screws nominal diameters1mm and 10mm

GB/T 3098.14: Mechanical properties of fasteners --- Widening test on nuts

GB/T 3098.15: Mechanical properties of fasteners --- Nuts made of stainless steel

GB/T 3098.16: Mechanical properties of fasteners --- Stainless steel set screws

GB/T 3098.17: Mechanical properties of fasteners --- Preloading test for the detection of hydrogen embrittlement---Parallel bearing surface method

GB/T 3098.18: Mechanical properties of fasteners --- Blind rivets testing

GB/T 3098.19: Mechanical properties of fasteners --- Blind rivets with break pull mandrel

GB/T 3098.20: Mechanical properties of fasteners --- Wing nuts with specified proof torque

GB/T 3098.21: Mechanical properties of fasteners --- stainless steel tapping screws

測試項目（最好有英文以及對應每個項目所對應的小標準）

緊固件機械性能測試

Mechanical properties of fasteners test

SGS廈門分公司工業部聯絡方式

梁曉芳karen.liang

Tel：0592 5761923

Phone：15223746970

E-Mail：Karen.liang@sgs.com